Community

 
Jump Menu:
Pause Switch to Standard View Famine in Far-Go: Death Saucer Token
Show More
Loading...
Flag Siberys December 26, 2010 7:10 PM PST


I made a token for the monster. It should print out at 4x4. Use cardstock and/or glue it to something.

Enjoy!
Flag VBMEW-01 December 26, 2010 7:19 PM PST
Greatly awesome, thank you
Flag Serow_Darkstar December 26, 2010 7:56 PM PST
Very awesome! I'm almost certain to use this. I don't suppose, however, that there's a chance of getting a reverse-side bloodied version of the token?
Flag Siberys December 26, 2010 8:29 PM PST


Ask and ye shall recieve.
Flag FlashbackJon December 26, 2010 11:08 PM PST
Nicely chosen artwork, as well.  

It's really too bad the actual mini is only large. 
Flag Siberys December 26, 2010 11:18 PM PST
Yeah, inorite. Monsterpocalypse is fun, I just wish more people around here played. Then I could justify investing in it.

Finding a good-sized version of that artwork was hard, though. And by hard I mean took a little longer than a google image search normally takes. 
Flag FlashbackJon December 28, 2010 12:25 PM PST

Dec 26, 2010 -- 11:18PM, Siberys wrote:

Yeah, inorite. Monsterpocalypse is fun, I just wish more people around here played. Then I could justify investing in it.



Agreed.  As evidenced by this very forum, the word "collectible" is often a dirty word.

I've used quite a few on my figs as D&D monsters before, but their bases are just slightly larger than 2x2, which makes multiple creatures on the same map slightly annoying.

Maybe the movie will pump some interest into it.

Flag ScottyMet December 29, 2010 8:37 AM PST

Dec 26, 2010 -- 11:08PM, FlashbackJon wrote:

Nicely chosen artwork, as well.  

It's really too bad the actual mini is only large. 



I ordered the mini (getting the Alpha and Hyper form together), and was disappointed that they're only large. It was very difficult to find reference photos that would show their proper size. They were only $6 for the pair, though, so not so much. I think I might just use them as Death Machines instead, and use this token for the Death Saucer.

Flag FlashbackJon December 29, 2010 8:42 AM PST
Notably, there's TONS of minis in Monsterpocalypse that seem appropriate for Gamma Terra, so I'll just link the gallery in case.

The presence of hyper forms just screams "MULTI-STAGE SOLO BATTLE" to me.   
Flag ScottyMet December 29, 2010 11:11 AM PST

Dec 29, 2010 -- 8:42AM, FlashbackJon wrote:

The presence of hyper forms just screams "MULTI-STAGE SOLO BATTLE" to me.   



Definitely!

I also ordered two Vice Pincers, to stand in for orange herps, and I was hoping that the Chompers would be large enough to use as Seps, but unfortunately no (again, problem with lack of size references). They can easily be Sep whelps, though... just need to get something for the Sep itself. Bulette would work fine, but they're a bit pricey.

Flag mvincent December 29, 2010 1:14 PM PST

Dec 29, 2010 -- 11:11AM, ScottyMet wrote:

I was hoping that the Chompers would be large enough to use as Seps, but unfortunately no (again, problem with lack of size references). They can easily be Sep whelps, though... just need to get something for the Sep itself. Bulette would work fine, but they're a bit pricey.


Interestingly: the original (suitably sized) plastic toy used by Gary Gygax as a Bulette/Sep is still being sold (in Rite-Aid) in an ironically named "Realistic Dinosaurs" playset. The set also contains a Roc and a Dragon. Unfortunately, the creature Gygax used as a rust monster is no longer part of the set.

Some other options include Star Wars Houjix and the 1Monk Landshark paper model.

Flag Delphmonk December 29, 2010 1:37 PM PST

Dec 29, 2010 -- 11:11AM, ScottyMet wrote:


I also ordered two Vice Pincers, to stand in for orange herps, and I was hoping that the Chompers would be large enough to use as Seps, but unfortunately no (again, problem with lack of size references). They can easily be Sep whelps, though... just need to get something for the Sep itself. Bulette would work fine, but they're a bit pricey.




My vote for Soul Besh is the Monsterpocalypse Dire Ant:


For Orb, the Squix:





For Terl, the Psi-Eel (with some wings added):




Flag ScottyMet December 30, 2010 9:04 AM PST

Dec 29, 2010 -- 1:14PM, mvincent wrote:

Interestingly: the original (suitably sized) plastic toy used by Gary Gygax as a Bulette/Sep is still being sold (in Rite-Aid) in an ironically named "Realistic Dinosaurs" playset. The set also contains a Roc and a Dragon. Unfortunately, the creature Gygax used as a rust monster is no longer part of the set.



Really? Cool. I've been wondering about those old toys lately. I'll have a look next time I'm in a Rite-Aid.

Dec 29, 2010 -- 1:37PM, Delphmonk wrote:

My vote for Soul Besh is the Monsterpocalypse Dire Ant:



Yeah, I'd considered that one.

Dec 29, 2010 -- 1:37PM, Delphmonk wrote:

For Orb, the Squix:





I bought two of those, expressly for that purpose.

Dec 29, 2010 -- 1:37PM, Delphmonk wrote:

For Terl, the Psi-Eel (with some wings added):




Oh! I hadn't thought of that one. Nice. I even have plastic wings from a cheap set of plastic bugs I bought.

Returning to the topic of the thread, though (Yeah, I know, I caused the drift, but I'll try to fix it now. heh)...

I don't think there are any miniatures that can properly represent the death saucer, but there are some models.

www.amazon.com/Triangular-Gravity-Atlant...
This one would be around 4.5 inches wide, which would work nicely if mounted on a 4" base.

www.amazon.com/Flying-Saucer-Model-Atlan...
Peronally I like this one, though. It's about 3" wide, which you could still put on a 4" base to bring it up to gargantuan without it looking weird.

www.amazon.com/Pegasus-Hobby-9100-Area-5...
This one is really nice, but it's too big... about 8" in diameter. Honestly, though, given the scale of the saucer on the maps in FiFG, it might work the best. I'm working under the assumption that the death saucer is the saucer that the visitors are on, which is crashed, but I might be wrong about that.

Flag Siberys December 30, 2010 9:21 AM PST
The death saucer doesn't actually make an appearance in FIFG - the stats are just there for GM use. Plus, Gargantuan is technically 4x4 or LARGER. Give it a base and you're good to go.

I just might buy two of those - mount one on a six-inch pole colored green, and do the second one up as if it had crashed, for bloodied and non-bloodied.
Flag ScottyMet December 30, 2010 10:05 AM PST

Dec 30, 2010 -- 9:21AM, Siberys wrote:

The death saucer doesn't actually make an appearance in FIFG - the stats are just there for GM use.



Thanks for the clarification there. I'd skimmed through the adventure, but I didn't look close enough to tell if the saucer was used in one of the encounters.

Dec 30, 2010 -- 9:21AM, Siberys wrote:

Plus, Gargantuan is technically 4x4 or LARGER. Give it a base and you're good to go.



There's Colossal at 6x6, though. There's only one miniature that size, though, and very few monsters, so it would still be very easy to just hand-wave it and go with the 8" saucer anyway.

Dec 30, 2010 -- 9:21AM, Siberys wrote:

I just might buy two of those - mount one on a six-inch pole colored green, and do the second one up as if it had crashed, for bloodied and non-bloodied.



That's a cool idea.

Flag Siberys December 30, 2010 10:17 AM PST
There's no colossal in 4e, so if you want your gargantuan space ship to be 6x6 or 8x8, it is.
Flag ScottyMet December 30, 2010 1:46 PM PST
Oh, did they remove colossal? Well, that explains it then. heh. Thanks.
Flag mightyeroc January 19, 2011 4:56 PM PST
Siberys, Your Token is awesome. I will be using it for sure. Have you thought of making any others? If I may I request a token for Ghengis Tangh, the warthog porker in a space suit. He was the main villian in the Games Day adventure Trouble in Freesboro.

I ask for selfish reasons slightly, because of my plan to run the Games Day adventure at my local shop in Feb.

Thanks!
Flag Seeker95 January 19, 2011 7:17 PM PST
I snagged the token for my game.

May I make a suggestion for the bloodied / flip side? Rather than making the token "sky" content red, could you make the green border red instead? (My image manipulation skills are in the toilet, or I would do it myself.)
Flag Siberys January 20, 2011 5:49 AM PST
I may be able to do Tangh. It might be a bit before I get to it, though.

I did the bloodied mark as a bleed effect because I thought it looked better than the solid circle, and I was designing it after the official FiFG stuff. I could do the border red - it's just a simple colorization - but I don't know if I might have to re-make the token to do it - I don't remember if I kept the component pieces or not.
Flag mightyeroc January 20, 2011 4:56 PM PST
Great, I'll keep an eye out. In the meantime I'm gonna try to cut a shrunk down pic of Tangh and blue-tac it to a token see how that goes...

maybe we'll get lucky and they will use his pic for a token in Legion of Gold.
Flag MiniatureGeek January 24, 2011 8:16 PM PST
I don't know how busy the other gentleman is but here is a quick token I cooked up.  It should print out exactly as a 1x1 inch token if you just have it print as is.




I tried a little bit closer shot don't know if these are better

Flag Seeker95 January 25, 2011 5:53 AM PST
These Boards could use a "Like" button so we could just click it on those posts where we have nothing worthwhile to add but wish to acknowledge the awesomeness of someone else's contribution.
Flag FlashbackJon January 25, 2011 7:49 AM PST
I "like" both of the above posts.
Flag LordKangus January 25, 2011 8:56 AM PST
I bloodied up Siberys's Death Saucer the other way around. Hope this works.
Bloody Death Saucer
Flag Seeker95 January 25, 2011 10:39 AM PST
Beautilicious!
Flag mightyeroc January 25, 2011 2:30 PM PST
Miniaturegeek, thanks they are both great!
Flag MiniatureGeek January 25, 2011 6:34 PM PST
No biggie they aren't nearly as nice as that saucer token but I hope they work well enough for you, any other tokens you need proxies of.Smile
Flag mightyeroc January 26, 2011 6:00 PM PST
Thanks, no others right now. I just really wanted to have one of Tangh for the Game day Event I'm doing.
Flag FlashbackJon February 1, 2011 3:21 PM PST

Jan 25, 2011 -- 5:53AM, Seeker95 wrote:

These Boards could use a "Like" button so we could just click it on those posts where we have nothing worthwhile to add but wish to acknowledge the awesomeness of someone else's contribution.



Anyone notice we have a rating system, a tweet button, a Facebook Like button, and the standard share/fav/email icons now?

Flag Cazra February 1, 2011 9:39 PM PST
I'm totally making my PCs fight the Death Saucer instead of Encounter 16 in FiFG now. Great token!
Flag ScottyMet February 3, 2011 4:19 AM PST

Feb 1, 2011 -- 3:21PM, FlashbackJon wrote:

Anyone notice we have a rating system, a tweet button, a Facebook Like button, and the standard share/fav/email icons now?



Not until I just read this post, but I only see the Like button myself. Still, very cool.

Flag LordKangus February 3, 2011 4:42 AM PST
Hmmm.. everything except the Like button seems to have vanished!
Flag RobotRock February 4, 2011 7:04 PM PST

Feb 1, 2011 -- 3:21PM, FlashbackJon wrote:

Anyone notice we have a rating system, a tweet button, a Facebook Like button, and the standard share/fav/email icons now?




I just noticed earlier today as well....

Flag Flintlocke June 14, 2011 1:25 PM PDT
any live link to the non-bloodied death saucer? original link appears to be dead
Post Your Reply
<CTRL+Enter> to submit
Please login to post a reply.
Jump Menu:
 
    Viewing this thread :: 0 registered and 1 guest
    No registered users viewing