It's been over year since I posted any images of my custom figs so I figure it's about time to post some more. Some were posted before, but I included them so all my mods would appear in a single thread. I just got this camera and it really doesn't do the figs justice but I figure some pics are better than no pics at all. I hope you enjoy.
"Admiral Ackbar" was one of my first mods I ever made and I got 4 stitches in my thumb making him. The exacto knife went right through the plastic and down to the bone in my thumb. You might be able to tell which mods were made while I had stitches :P. I made "Bespin Han" as a stand-in fig for nimzomitch until he pulled a RS Han. It was made from a Naboo Soldier and is rather blocky because it was only meant to be a stand in piece. The "Dead Rebel" was made by cutting up a Rebel Trooper, repositioning the pieces and gluing them back to the base.
These two E-Web Blasters are not mods but were made from scratch. I used plastic pieces left over from models, bits of metal, half of a Gonk Power Droid and some Sculpey to create them. I also made stat cards for it and other items that I hope to post for others to use. The stats and rules cards are from the Ultimate Mission books, except the rules on jumping which is a mix of all the different UM rules cleaned up into one.
Here are some modded "Scout Troopers-Running Toward the Fight". I just cut them at the waist, rotated them a little, glued it and then sculpted the waist to look correct. The arms were cut and pinned as well. The "Dead Trooper" fig was made like the above "Dead Rebel".
These are my modded Imperial Officers-"Death Star Officer" was made from an Imperial Officer body with a Rebel Trooper head. "Imperial Officer-Being Choked" was made the body of the above mentioned Rebel Trooper with an Imperial Officer's head. "Imperial Officer-At Attention" was made from Tarkin's body with an Imperial officer's head. Tarkin's head was used for a different mod that you'll see later on.
This is a "Twi'lik Sith" with a couple of droid friends from the Death Star. The body of the "Twi'lik Sith" was made from a Klatooninian Enforcer with the head of a Twi'lik Scoundrel. I gave him two lightsabers and Sith tattoos on his lekku to add some personality. "The Death Star Droid" is just an R2 repainted to look like the droid found on the Second DeathStar and the "Interrogation Droid" was made completely from Sculpey. I included the front of the stat card I made for reference.
Here's my "Darth Vader-Who's Your Daddy?". The fig was made from RS Darth Vader-Dark Jedi. The scene it's from is still one of the best in all movies. I know that his lightsaber was off when he held his hand out to Luke but I decided to keep it on for the mini.
These are a couple of modded Tuskens. The two with staffs were cut, adjusted, pinned and sculpted into different poses. The Tusken on the Bantha and the Tusken on the left were cut at the waist and switched. I've seen that other people have done this switch as well; it's quite simple to do and I highly recommend it.
The "Oola-Doomed Dancer" was a Twi'lek Bodygaurd that was completely cut apart at all the joints, pinned and readjusted. I used the staff for the chain and positioned it to look like Jabba was pulling on it. "Bib Fortuna" was a Twi'lek Scoundrel and I hope that WOTC will make one with a CE that improves Jabba. "Boba Fett" was a CS Clone Trooper that I made as a stand-in until I finally got one (I ended up having to buy it).